Canting Belgrade

Canting

Edging is a key process in the production and processing of panel materials such as chipboard, MDF and plywood. This procedure not only improves the aesthetic appearance of the product, but also significantly increases its resistance to wear and moisture.

What is edging?
Edging is the process of processing the edges of sheet materials in order to protect them and improve their aesthetics. During canting, strips of different materials such as ABS, PVC, melamine or veneer are glued to the edges of the panels. These tapes not only protect the edges from damage, but also give the product a finished, professional look. Edging is especially important in the production of furniture, where aesthetic and functional requirements must be met at a high level.

How is edging performed?
Edging is performed using specialized edging machines. The process begins by applying glue to the tape, which is then pressed against the edge of the board. There are various methods of applying adhesive, including thermally activated adhesive and solvent-based adhesive. After the tape is attached, the excess material is removed and the edges are smoothed to achieve a perfect finish. There is also manual edging that is used for smaller projects or repairs, but the process is demanding and often not as precise as machine edging.

What are the most common banding mistakes and how to avoid them?
The most common banding mistakes include incorrect adhesive application, poor tape alignment and insufficient pressure when gluing. Improper application of the adhesive can lead to poor tape adhesion, resulting in peeling edges. Poor tape alignment can cause uneven appearance and aesthetic defects. Insufficient pressure when gluing can result in air bubbles between the tape and the board, which reduces the durability of the edge.
To avoid these mistakes, use quality materials and precision edging machines. Also, it is important to follow the canting process carefully, ensuring that the glue is evenly applied and that the tape is properly aligned and firmly pressed against the board. Regular maintenance and calibration of edge banding machines can also help achieve optimal results. If you need a cantoning service, on this page you can find a list of companies in Belgrade that deal with cantoning.